Skip to main content

How to Set Up & Take Down Truck Bed Parade Floats

PARADE FLOATS INSIDEHow to Set Up a Cold-Air Inflatable Inside a Truck Bed

 It’s becoming more common to haul cold-air inflatables via truck at local parades. Not only do parade inflatables attract attention and generate buzz for organizations and local businesses, but they're also easy to set up, manage, and take down. The information below was put together to help you pull off a successful parade float using cold-air inflatables.

Set-Up Time: 15 minutes

Things You’ll Need:

    1. Inflatable with fan system (blower)
    2. Tether Straps with Carabiners to Secure the Inflatable
    3. A gas generator (Power Source) 2000W
    4. A truck with Hardware in the truck bed for attaching tethers.

Before the Parade: Set Up Instructions

    1. Start with a clean, empty truck bed.
    2. Place generator in the truck bed near the cab.
    3. Center inflatable in the truck bed. Locate the front and back of inflatable based on how you want to be displayed.
    4. Attach the inflatable’s tether straps to the attachment hardware (cargo hooks) in the truck bed using carabiner clips (usually provided by the inflatable manufacturer).
    5. Tighten the tether straps so the inflatable will remain inside the truck bed.
    6. Close all zippers on the inflatable.
    7.  Start the generator.
    8. Plugin the fan system (blower).
    9.  As the inflatable inflates, slowly loosen and adjust the tether straps as necessary so that the inflatable is secure in the truck bed & facing the correct position.

During the Parade

    1. Enjoy the ride!
CAUTION: DO NOT DRIVE FASTER THAN 5 MPH WHILE THE INFLATABLE IS IN THE TRUCK BED. EXCEEDING 5 MPH COULD CAUSE DAMAGE OR INJURY.

After the Parade: Take Down Instructions

    1. While holding a tether strap, open the deflation zipper.
    2. Unplug the fan system (blower) from the generator.
    3. Gather the inflatable toward the inside of the truck bed as it deflates.
    4. Unhook the tether straps from the truck bed.
    5. Remove the inflatable from the truck bed and place it onto a clean area where you can roll out and pack it back into the inflatable storage bag.

View More "Installation Tips and Tricks" Articles

Plugging In Your Inflatable
Sizing Up Truck Bed Parade Floats
All About Blowers | Custom Inflatables Accessories
All About Ballasts - Securing Custom Inflatables

What Others Say About Landmark Creations


"I was especially impressed with your ability to turn around such excellent work on very short notice, and at a fair price."

- R. Stever-Zeitlin, General Mills

"We had a very positive experience working with Landmark Creations and were very impressed with their service and how quickly we were able to receive our inflatable. The product is high quality and super easy to use, which makes a huge difference when setting up."

- Missy Keiper, Avera McKennan Foundation

"We usually have to keep the arch up for at least 30 minutes after our races since so many people want to get their photos taken with it!"

- Art Boulet, Muddy Monk

“The likeness to our company mascot was amazing. We used the balloon at the Winn Dixie Home & Garden show ... and we have had rave reviews.”

- Christy Bernard, Tony Chachere’s

"We received our inflatable and gave it a test run Saturday afternoon. To be short; Excellent Work. Thanks again for all your efforts."

- Curtis Gadula, Brock University

“[The inflatable arch] created a wonderful backdrop to brand our events, capture our sponsors in the photos used by the participants, and made it easy to travel down the coast of California without taking up too much space on our trucks.”

- Amy Daugherty, California Coast Classic